向俊,韩秋实,彭宝营,李大.车磨复合机床主轴系统模态分析[J].新技术新工艺,2011,(3): .[.Modal Analysis of Spindle System on Turning-grinding Machine Tool[J]2011,(3):.] |
车磨复合机床主轴系统模态分析 |
Modal Analysis of Spindle System on Turning-grinding Machine Tool |
|
DOI: |
中文关键词: 主轴系统 有限元 模态分析 |
英文关键词:Spindle system FEM Modal analysis |
基金项目:北京市教委科技发展计划重点项目(KZ200711232016) |
向俊 韩秋实 彭宝营 李大 |
北京信息科技大学机电工程学院;中国机械科学研究院;国家知识产权局专利审查协作中心; |
摘要点击次数: 335 |
全文下载次数: 38 |
中文摘要: |
利用有限元分析软件ANSYS建立车磨复合机床主轴系统的三维有限元模型并进行模态分析,得到了前4阶固有频率及模态振型,同时提出改善机床动态特性的方法,为类似主轴系统的模态分析提供了参考。 |
英文摘要: |
The 3D finite element model of the spindle system on turning-grinding machine was established by utilizing ANSYS,the first four natural frequencies and vibration models were obtained.Some methods to improve dynamic characteristics of the machine tool were put forward.That is a reference for analysis of similarity spindle system modal. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |