| 杨大勇,王大鹏,张海峰,伏金娟.牛头式电火花加工机床重力引发变形的有限元分析[J].新技术新工艺,2011,(3): .[.Finite Element Analysis for Deformation Caused by Gravity of Ngau-Tau-type EDM Machine[J]2011,(3):.] |
| 牛头式电火花加工机床重力引发变形的有限元分析 |
| Finite Element Analysis for Deformation Caused by Gravity of Ngau-Tau-type EDM Machine |
| |
| DOI： |
| 中文关键词: 牛头式电火花加工机床 变形 有限元 DEFORM |
| 英文关键词:Ngau-Tau-type EDM machine Deformation Finite element analysis DEFORM |
| 基金项目:863计划重点项目课题资助项目(2009AA044201); 科技重大专项课题资助项目(2009ZX04003-022); 北京市自然基金项目资助项目(3092011) |
| 杨大勇 王大鹏 张海峰 伏金娟 |
| 北京市电加工研究所; |
| 摘要点击次数: 340 |
| 全文下载次数: 38 |
| 中文摘要: |
| 牛头式电火花加工机床的主轴部件精度受重力影响较大。本文使用DEFORM-3D软件对牛头式机床由重力引发的变形进行了有限元模拟分析。结果表明,立滑枕可近似视为刚体,其位移主要来源于平滑枕的变形。当主轴部件从十字马鞍中部移动到最前端时,立滑枕的整体位移量增大了2倍以上,角度偏转量增加了1倍,设计时应结合实际需求加以改进。 |
| 英文摘要: |
| The main spindle component precision of Ngau-Tau-type EDM machine is greatly influenced by gravity.In this article,we used DEFORM-3D software to do the finite element analysis for deformation caused by gravity of Ngau-Tau-type EDM machine,the result showed that vertical ram could be approximately viewed as a rigid body and the displacement was mainly from the deformation of the horizontal ram.When the main spindle component moved from the middle of crisscross saddle to the front,the displacement of vertical... |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|